aluminium clutch plates

doogalman · 12-Jun-2005, 20:03

I am after a new set of 12 tooth aluminium clutch plates next week. Is there anywhere doing them at a good discounted price, as i am strapped for cash at the moment (ordering a complete new slipper did not help) .
So far had a quote of about £115 , is this about right or do you know of a better deal.

Doogalman

Jon · 12-Jun-2005, 20:10

Do you have the slipper fittted yet. Do you intend to fit the new plates to the slipper? I suggest that you fit carbon plates fron JHP, they are dearer but will pay back dividends by not eating your basket.

doogalman · 12-Jun-2005, 20:48

Waiting for the slipper , will have it this week. Are the plates made of carbon? i thought that the carbon clutch plates related to the friction material! Now i got more options to look into. What sort of money are the carbon plates? I have read that some people get fairly good longterm wear with aluminiun plates against the outer.

Doogalman

keefer · 12-Jun-2005, 20:56

the carbon is the friction material they are then mounted on to a light alloy plate. cost £180
somewhere on the board there is talk off the S4 plates being the ones to go for ?

doogalman · 12-Jun-2005, 20:59

Thats what i thought. I had found loads of carbon ones on us ebay made by barnett with aluminium plates, but unfortunatly they wont ship worldwide. Shame considering the exchange rate.

Doogalman

[Edited on 12-6-2005 by doogalman]

rockhopper · 12-Jun-2005, 23:46

ST4 plates are the ones to go for. Ally plates, much quieter than steel and dont muller the basket so much.

nelly · 13-Jun-2005, 00:13

I run ST4S plates in my slipper with no problems at all. They are about the £115 mark.
You can get Bucci for about £140 and the surflex ones, the most common carbon faced plates, for about £160.
Barnett plates are available from PDQ I think who distribute them in the UK. They are pretty pricey if I recall.
I'd go for the ST4S if moneys tight. I've got about 8k on mine and I do use the slipper a lot

doogalman · 13-Jun-2005, 01:04

Cheers
i will be going the st4s route, thanks for the input.

Doogalman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

12-Jun-2005, 20:10	#2
Jon Registered Forum User Ducati Corse Posts: 3,921 Join Date: Jun 2001 Location: Drayton Bassett, Staffs Mood: Tad more confident Do you have the slipper fittted yet. Do you intend to fit the new plates to the slipper? I suggest that you fit carbon plates fron JHP, they are dearer but will pay back dividends by not eating your basket. Reply

12-Jun-2005, 20:56	#4
keefer Registered Forum User Ducati Meccanica Posts: 2,518 Join Date: Jul 2004 Location: hants Mood: Found a CR250. Let the bone braking begin the carbon is the friction material they are then mounted on to a light alloy plate. cost £180 somewhere on the board there is talk off the S4 plates being the ones to go for ? Reply

12-Jun-2005, 23:46	#6
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton ST4 plates are the ones to go for. Ally plates, much quieter than steel and dont muller the basket so much. Reply

13-Jun-2005, 01:04	#8
doogalman Registered Forum User WSB Hero Posts: 9,937 Join Date: May 2003 Location: Enjoy as much time without work Mood: No point in working long hours to die early Cheers i will be going the st4s route, thanks for the input. Doogalman Reply