Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > How do I bypass the immobiliser to fit a race dash?

[marchesini]

Originally posted by Ducman851
While I dont have a Translogic dash on my M800. I do however have an FIM ECU and a SPA Technologies Tach fitted. Once the stock ECU is gone the bike will start and run just fine I pulled power and ground for the Tach from the factory harness. Tach signall from the harness as well. I even have an oil temp set up but had to run the propriatary wiring from the tach to the sensor that came with it.

So your M800 uses the exact same immobiliser that comes on the S4R? If so, then there is hope. Do you still have the standard clocks fitted and if so did you try to run it without the clocks fitted?

Pics please if you have them.

Cheers

simon

PS. How much are the FIM units over there. I have a friend who is visiting from San Francisco in a couple of weeks so if this the way to go, maybe I can take advantage of the exchange rates.

[Edited on 17-6-2005 by marchesini]