Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Hello - and clutch question

[nathanTX]

So, I took the clutch apart this weekend. Many thanks to my friend Uwe for welding up the hub holding tool and giving a hand. Definitely need new plates. The tangs are pretty banged up and the friction material is almost gone on some plates. I would think a new basket is in order as well. But, you guys have seen a lot more of these than I have. So, take a look at the pics and tell me what you think. New basket?





I mentioned the possibility of going to an ST4S clutch (as I have read about here) to a friend with an ST4. He thought that was funny as all the ST4S guys he knows have gone to aftermarket. He said one of the most highly rated ones on the ST board is by Pro Cutting, or is often called "Charlie's Clutch".

Info here: http://sky.prohosting.com/ssnyder/product4.htm

I couldn't care less about quiet, but I would like long lasting and the less it's rattling around in there, the less damage it's doing. So, anyone familiar with this option?