| I think my spindle is as quick change as your going to get on a standard setup, one end (RHS) has a nylon insert that holds an alignment pin in place for locating in the fork leg recess, the other end has a nylon cone that helps guide it through the bearings, speedo drive (or spacer)and LH fork leg.
On top of that I have a alloy bar with has nylon inserts at each end to aid spindle removal.
I did a quick front wheel change in the Brands Garage just after I unloaded the bike on Sunday evening.
Used this system when I was racing my 916. | 
skidlids
Hybrid Mode
