Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 22-Jul-2005, 15:53
Shazaam!'s Avatar
DSC Member Shazaam! Shazaam! is offline
DSC Club Member
Big Twin
 
Posts: 1,167
Join Date: Nov 2001

The eccentric hub should nominally set the axle between the 4 and 5 o'clock position (viewed from the left side). But you can also obtain the proper chain tension when the eccentric is in the wrong position - with the axle set between the 1 and 2 o'clock position. If it is set higher than the 3 o'clock midpoint, there will be inadequate clearance between the lower run of the chain and the swingarm and the rear ride height will be too low. You'll also have inadequate clearance between your rear tire and hugger clearance so it'll rub.
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 02:03.