| \'tis a strange one!!!
When I first fitted mine,both sides flashed too fast. Then after removing them for a trackday and then refitting them one side was slow and the other fast. I tried swapping around teh wiring on each pair of wires (for each indicator) and managed to get them to work fine.
Then after a couple of weeks, one side started to flash quickly again!!!
I thought it must be a loose wire or similar, but could not fix it. I've tried several combinationjs since to no avail. Jasper did send me a diagram of how to wire power resisitors up in parallel with the rear pair to get it to work, but as I didn't need them before, I'm struggling to see why I do now.
I contacted the guy who sold me them and he said that it may be to do with the type of indicator relay I have,but he was a bit vague!!
So the answer is - I don't know!!!
I will try the power resistors and see if that cures it.
'tis a strange one and no mistake!!!!
I can email Jasper's pic to anyone interested (as long as Jasper's happy for me to!!)
Tim  | 
Threaded Mode