 19-Aug-2005, 01:09 | #10 |
| Registered Forum User GTL  Posts: 414 Join Date: Jul 2003 Location: Germany, but from Southport Mood: I want to come home ::(:but then After hours, if fact almost a full day, I decided to lay the bike on some tyres and pick the tin out bit by bit. I then made a tool (see attachment) that fits perfectly in the inlet holes. 2 mins later out came the filter - or what was left of it. Unfortunatly if you don't tighten them they start leaking. I've now fitted a jubilee clip to the filter and attached with wire to the rear engine mount. We'll see if it comes off any easier next time.  | |
Threaded Mode