EXHAUST

aka.eric · 30-Aug-2005, 18:31

Came across a pair of Ducati silencers for 851/888,but the pipe is much larger diameter than the original Y piece.Any chance of obtaining the correct size Y piece 50mm?

neil · 30-Aug-2005, 18:43

Looks like SP silencers........could be quite expensive to get the headers as well! You could always take them to your local metal bashers, so long as they do nice stainless ductwork they might be able to modify them.

sparkin · 30-Aug-2005, 20:58

You`re right they`re SP ones like I have on mine,bit like hens teeth are they(Que someone saying "I`ve got a set in the shed").

Aka Eric, bit of a nightmare finding trick bits for these old buses now,looking back god I was lucky stumberling on the bits for mine!

Try this for some trick headers

http://217.199.188.40/xmb/viewthread.php?tid=23566

weeveetwin · 30-Aug-2005, 21:56

Hi Aka.eric

If you find you need to offload those SP cans after all, just let me know. If they're nice ones, I could be persuaded to take 'em off your hands!

Ta
Steve

Jasper · 30-Aug-2005, 22:01

Me too!!

sparkin · 30-Aug-2005, 22:08

I knew I should have broken mine instead of selling it whole.

851neil · 30-Aug-2005, 22:23

I could loan you some headers (SP2) for the metal basher to copy from (if that's the route you have to go down) - but you can't have em for love nor money !!!

aka.eric · 31-Aug-2005, 00:42

Thanks for the explanation.Sods Law I suppose,thought they would fit to system.Probably not a good idea to cut them to fit!.The standard headers are common enough arent they?.Wasnt sure what they were off,right shape for 888/851,Ducati part but a straight through silencer.I can see the difference now against the cans that came on the bike.

weeveetwin · 31-Aug-2005, 01:16

aka.eric

They're the cans that came with the SP4/5 bikes. Made by Termignoni, but not stamped. Here's a pic.

Steve

Screwy · 31-Aug-2005, 01:16

Hmmm , They look very like the carbon cans fitted to my bike (an 851 with an 888 motor ) will have to slip one off and measure up .

Paul

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

30-Aug-2005, 18:31	#1
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 EXHAUST Came across a pair of Ducati silencers for 851/888,but the pipe is much larger diameter than the original Y piece.Any chance of obtaining the correct size Y piece 50mm? Reply

30-Aug-2005, 18:43	#2
neil Registered Forum User Mille Posts: 119 Join Date: Jan 2004 Location: Tyne & Wear Looks like SP silencers........could be quite expensive to get the headers as well! You could always take them to your local metal bashers, so long as they do nice stainless ductwork they might be able to modify them. Reply

30-Aug-2005, 21:56	#4
weeveetwin Registered Forum User 500SD Posts: 779 Join Date: Apr 2004 Location: Wearside Hi Aka.eric If you find you need to offload those SP cans after all, just let me know. If they're nice ones, I could be persuaded to take 'em off your hands! Ta Steve Reply

30-Aug-2005, 22:01	#5
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Me too!! Reply

30-Aug-2005, 22:08	#6
sparkin Registered Forum User Big Twin Posts: 1,734 Join Date: Jun 2003 Mood: This is a carbon free zone! I knew I should have broken mine instead of selling it whole. Reply

30-Aug-2005, 22:23	#7
851neil Registered Forum User 500SD Posts: 698 Join Date: Mar 2005 Location: Bishop Auckland Mood: need a bike... I could loan you some headers (SP2) for the metal basher to copy from (if that's the route you have to go down) - but you can't have em for love nor money !!! Reply

31-Aug-2005, 01:16	#9
weeveetwin Registered Forum User 500SD Posts: 779 Join Date: Apr 2004 Location: Wearside aka.eric They're the cans that came with the SP4/5 bikes. Made by Termignoni, but not stamped. Here's a pic. Steve Reply

31-Aug-2005, 01:16	#10
Screwy Registered Forum User Mille Posts: 359 Join Date: Mar 2005 Location: Bradford West Yorks Hmmm , They look very like the carbon cans fitted to my bike (an 851 with an 888 motor ) will have to slip one off and measure up . Paul Reply