Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > higher bars and fairing mods

[Iconic944ss]

Cyclecat webpage for ST2 mounting - sadly it does not show 800/1000DS

http://www.cyclecat.com/DBR5-1.htm

Good luck - Frank

[Richard]

Can you see the pictures of before and after???
Supposed to show how much rise etc...

[skibum]

Thanks Richard!

Looks pretty good to me. I'll buy a pair. The Cycle Cat web site says that you need their "master cylinder spacer kit" for the 1000 DS. Did you get that?? Also any chance of a photo that shows off the titanium finish? My bike is grey with red wheels and I think the titanium will look pretty good!

Thanks -

Scott

[Richard]

Hi,
Cyclecat supply spacer kits for clutch and brake reserviors, but these are not needed, (also supply bits of hose)

You will need some new grips, unless u think u can get the originals off without damaging them. I got some slightly softer rubber compound ones from Scott i think. The medium grey ones match the seat!

Have attached some more photos as well.

Good luck.

Rich

[Richard]

And Another