Ok Here we go then. The wife fancys a bike but has a bit of trouble finding one that she can get on too. Well we found a New Honda CB125R which she could fit but is about 6 ins to tall. Does any one know if the rear spring could be made a little smallier. So this could drop the ride height. Is there a company that could make us a rear spring. We could get the seat pad filed down a little ( could get about 1 to 1 1/2 ins out of that) Yes we know it a Honda and only a 125 but i think she needs to start somewhere. Any help or advise must welcome.
Seversal companies lower bikes - there was one in MCN I think a few weeks back. The eother thin the seat out, lower/change the rear shock or both. Try a Google search...
We have just changed the wifes bike from a 600 monster to a 04 Sv650s. It was too high for her so I got a set of lowering links for it and it lowered the seat hight by 1 inch, I aslo lowered the front by dropping the forks down by 10mm.
she gets on fine with it but I might by a thinner seat, I will buy one because I don't want to mess up the original one.