Hmm,its a pretty common fault on the 749/999's to have regular clutch bleeding sessions.Take a look at the fluid levels in the master cylinder while the bike is on the sidestand,...not much in there,...is there??Dunno if air gets in here,just that some need a bleed now and again,some dont.
Dead easy to do on these bikes,just remove the master cylinder cap.Have a look inside,...see that little bolt head?He's your boy,(cant remember the exact size,4mm?)undo the bolt a little and gently squeeze/pump the clutch lever.See those bubbles coming out,....continue squeezing untill they disapear.Tighten the bolt,replace the cap,...hey,you have just bled your clutch.Sit back in the warm glow of a job well done.
NB,its good to have plenty of rags lying around to catch any fluid that might want to spoil your paintwork.Its also best if the bike is upright,like on a paddock stand or summat.
Hybrid Mode
