| |
| #1  12-Oct-2005, 23:16 | ||||
| ||||
| col it's the same as a disc brake on a car, just one bleed nipple and dot 5 not dot 3, just watch the fluid when you open the master cylinder and out of the bleed nipple, just put a pipe on the bleed nipple and a ring spanner undo the nipple pump the lever once do the pipple up and let the lever out and repeat, that way the air wont go back when you let the lever go, takes two people but thats the way I bleed the bikes and cars I've done,    |
Hybrid Mode
