| WTF: Take a ride height measurement first with the axle at the nominal 4:30 position. Then reset the ride height after the chain freeplay is set to 25-35 mm.
An eccentric adjustment is always needed to adjust freeplay after a sprocket change so wheelbase and ride height will always change somewhat. The following chain lengths will place the axle about 4-5 o'clock.
1. 14/38
2.
14/36 (2.57) 94-links (525HV-916SP)
14/37 (2.64) 94-links (520VL4-748SP,748SPS)
14/38 (2.71) 94-links (520VL4-748)
14/39 (2.79) 94 or 96-links
14/40 (2.86) 96-links
14/41 (2.93) 96-links
14/42 (3.00) 96-links
14/43 (3.07) 96 or 98-links
14/44 (3.14) 98-links
14/45 (3.21) 98-links
14/46 (3.29) 98-links
14/47 (3.36) 98 or 100-links
14/48 (3.43) 100-links
15/36 (2.40) 94-links (525HV-916, 996)
15/38 (2.53) 94 or 96-links
15/39 (2.60) 96-links
15/40 (2.66) 96-links
15/41 (2.73) 96-links
15/42 (2.80) 96 or 98-links
15/43 (2.87) 98-links
15/44 (2.93) 98-links
15/45 (3.00) 98-links
15/46 (3.07) 98 or 100-Links
15/47 (3.13) 100-links
15/48 (3.20) 100-links
[Edited on 12-1-2003 by Shazaam!]  | 
Shazaam!
Threaded Mode