How many dished plated have you installed in the clutch pack?
I suffered similar problems running a single plate, shuddering graunching noise and when letting the clutch out the lever would hit a notch at about 2/3 of its travel and the bike leap forward.
I stripped the clutch pack and installed two dished paltes one facing inwards in position two and the other facing inwards one plate from the end of the pack.
On the Bucci slipper the plates which are dished are identified with a dot just below the cut out. The dot signifies which side of the plate is concave. I'm not sure about the DP.
For heavy racing use up to four dished plates can be used provided they are evenly spread throughtout the clutch pack.
Hybrid Mode
