Registered Forum User
BSB Star
Posts: 5,207
Join Date: Jul 2001
Location: In the wilderness
Mood: All that is necessary for the triumph of evil is that good men do nothing
I'm just finishing a bike workshop/garage/office. It's 32 x 24 ft and is built entirely from plywood. I built a timber frame first then clad it with 1/2" exterior ply on the outside, lined the gap with various thickneses of polystyrene and clad the inner walls and roof with 1/4 ply. The foor is tongue n grooved floor sheeting. With electrics etc I'm not gonna see much change out of 10k.
Threaded Mode