External Racing Parts - Page 4

phil911 · 11-Nov-2005, 20:56

Here is the front part from an original Racing frame ...

phil911 · 11-Nov-2005, 21:04

Then the brackets to support the lateral fairings ...

phil911 · 11-Nov-2005, 21:16

And the front nose fixing mode ...
Below : Fastener DZEUS
Above: Original screws

Any question ?????????

851neil · 11-Nov-2005, 21:19

cheers Phil that's great - my next question is - where are those lights from ??
cheers

Neil

phil911 · 11-Nov-2005, 22:54

It's a French initiative from a former racer in charge of carbon parts company.
They were used during endurance races.
On the joined file (sorry for the quality ...) you can see a red rubber on these lights on Mertens/Polen/Picotte's bike along 24H Bol d'or 1993 ...

phil911 · 11-Nov-2005, 22:57

Here's a pic of lights set ...

phil911 · 11-Nov-2005, 22:58

An individual ...

851neil · 11-Nov-2005, 23:41

Phil, do you know if these parts still available for purchase or are they like hens teeth !!!
I'd love to get hold of a set of the carbon mounts and the lights themselves - but it's probably a case of having something made up I suppose.
The info is great by the way - do you have any detail schematics of the bracketry for the carbon air tubes or if not could you find time to post a sketch with dimensions ??
thanks very much

Neil

phil911 · 12-Nov-2005, 00:17

Next week, I'll phone to this mate to whom I used to deal with ... I'll not be surprised to learn they're still available...

By air tube, do you mean the big carbon part from the nose fairing to the airbox, around the steering column ??? (Sorry but I'm not very familiar with english language ...)

I made a big mistake when I installed this carbon part ... I forgot my camera and have any pic ...

Which exact dimensions would you like to get ???

851neil · 12-Nov-2005, 11:12

yes the big carbon part - sorry, It's the dimensions of the mounting brackets - items 6 & 15 on the schematic you posted.
many thanks

Neil

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

11-Nov-2005, 20:56	#31
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... Here is the front part from an original Racing frame ... Reply

11-Nov-2005, 21:04	#32
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... Then the brackets to support the lateral fairings ... Reply

11-Nov-2005, 21:16	#33
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... And the front nose fixing mode ... Below : Fastener DZEUS Above: Original screws Any question ????????? Reply

11-Nov-2005, 21:19	#34
851neil Registered Forum User 500SD Posts: 698 Join Date: Mar 2005 Location: Bishop Auckland Mood: need a bike... cheers Phil that's great - my next question is - where are those lights from ?? cheers Neil Reply

11-Nov-2005, 22:54	#35
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... It's a French initiative from a former racer in charge of carbon parts company. They were used during endurance races. On the joined file (sorry for the quality ...) you can see a red rubber on these lights on Mertens/Polen/Picotte's bike along 24H Bol d'or 1993 ... Reply

11-Nov-2005, 22:57	#36
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... Here's a pic of lights set ... Reply

11-Nov-2005, 22:58	#37
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... An individual ... Reply

12-Nov-2005, 11:12	#40
851neil Registered Forum User 500SD Posts: 698 Join Date: Mar 2005 Location: Bishop Auckland Mood: need a bike... yes the big carbon part - sorry, It's the dimensions of the mounting brackets - items 6 & 15 on the schematic you posted. many thanks Neil Reply