| Hmmm perhaps not info for the masses, But.
you need to lower the back of the engine just enough to get the two sleeves out which should be possible by removing the swing arm bolt and the rear engine mount then let the engine swing down just enough with a trolley jack to release the swingarm.
you will need to be very careful though with regard to clearance of stuff.
and you will still have to remove allot of stuff to be able to move it anyhow. faring, Exhaust's, air box, throttle bodies and so on. in which case you are only a few block connectors away from unplugging the whole thing.
up to you ultimately but just go slow. last thing you want to do is graunch something up | 
Threaded Mode