Quote:
Originally posted by dave996
Cheers Karl, I don't have a bit that the gear lever attaches to.
Carbon749, I think I have both but I after the road set up.
Cheers
d |
Don't think you mean the bush in the gear lever I think you mean the shaft / pin. If so, again you used your standard one. The linkage between the gear lever and the splined shaft can be your standard linkage.
If you mean that you do not have the bolt hole below the foot peg to screw the shaft / pivot bolt in to then you have run with a race shift, ie: gear lever straight on to the splined gear shaft.
Threaded Mode