Quote:
Originally posted by rockhopper
Fairly pointless exercise as far as my bike is concerned. The oil is thicker in the cold weather so you'll need to turn it up a bit and i don't ride in the cold weather!
Just keep on turning it up till the oil drips at about one drop per minute at tickover. You'll find that in reality this is too much so you can back it off a fair bit. I don't get any mess on the wheel. |
Mate,
you need to use the filler bottle to "prime" the system first.
If it's only1/3 way down the tube it wont go any further until you do.Connect the filler tube & use the bottle to "pump" the system until oil comes out, it's then primed.
You should only need it set to around 2 for it to feed OK after that, DONT repeat DONT run it on the prime setting or you'll get a rear wheel covered in oil folowed by a get off on the first left hander.
Hybrid Mode
