slipper clutch - ball and ramp type

Bungi · 08-Feb-2006, 01:18

so ive got me a slipper clutch!!!!

but i dont know much about it, long story really about how i came about it but needless to say, i dont know how to tell how worn / good it is, what should i look for ??

i can see the plates are a bit worn, so il need new ones if its going to be worth fitting the thing on, jsut looking for some pointers as to how i can tell if its all in a serviceable condition.

i can post some pics if its useful but what would we need to be looking at?

thanks

ericthered40 · 08-Feb-2006, 01:54

Not much to them really just the basket sides were the plates smash in to it and get toothed badly. make sure all the balls are there and the ramps they run in are smooth.

Carbon749 · 08-Feb-2006, 02:10

Is the outer basket for a slipper clutch the same outer basket as a standard clutch ?

ericthered40 · 08-Feb-2006, 02:22

JPM · 08-Feb-2006, 12:13

Usual things check basket, and check the ramps as they can wear if not greased etc

Bungi · 08-Feb-2006, 20:32

ok what type of grease should i use on the ramps?
i have some of that silkoline red stuff, is that ok?

in seem to remember that the basket looks ok

ericthered40 · 08-Feb-2006, 20:44

That should be fine just don't over do it with the grease, just a small blob to keep your balls in place

JPM · 09-Feb-2006, 12:05

You need some high temp stuff as it gets mighty hot inside a clutch assembly, someone did say in a thread a while ago what grease they use and I went and bought a tube, it's not cheap something like £25 for 100g but it doesn't melt

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

08-Feb-2006, 01:54	#2
ericthered40 Registered Forum User Big Twin Posts: 1,698 Join Date: Jan 2005 Location: N F A Mood: renegade sexy racer Not much to them really just the basket sides were the plates smash in to it and get toothed badly. make sure all the balls are there and the ramps they run in are smooth. Reply

08-Feb-2006, 02:10	#3
Carbon749 Registered Forum User Big Twin Posts: 1,956 Join Date: Mar 2005 Location: Normally in my own little world Mood: I own a flame thrower Is the outer basket for a slipper clutch the same outer basket as a standard clutch ? Reply

08-Feb-2006, 02:22	#4
ericthered40 Registered Forum User Big Twin Posts: 1,698 Join Date: Jan 2005 Location: N F A Mood: renegade sexy racer yes Reply

08-Feb-2006, 12:13	#5
JPM Registered Forum User BSB Star Posts: 5,682 Join Date: Jun 2001 Location: NW England Mood: Soon my pet, soon Usual things check basket, and check the ramps as they can wear if not greased etc Reply

08-Feb-2006, 20:32	#6
Bungi Registered Forum User Big Twin Posts: 1,191 Join Date: Apr 2003 Location: kent uk ok what type of grease should i use on the ramps? i have some of that silkoline red stuff, is that ok? in seem to remember that the basket looks ok Reply

08-Feb-2006, 20:44	#7
ericthered40 Registered Forum User Big Twin Posts: 1,698 Join Date: Jan 2005 Location: N F A Mood: renegade sexy racer That should be fine just don't over do it with the grease, just a small blob to keep your balls in place Reply

09-Feb-2006, 12:05	#8
JPM Registered Forum User BSB Star Posts: 5,682 Join Date: Jun 2001 Location: NW England Mood: Soon my pet, soon You need some high temp stuff as it gets mighty hot inside a clutch assembly, someone did say in a thread a while ago what grease they use and I went and bought a tube, it's not cheap something like £25 for 100g but it doesn't melt Reply