Snapped Chain - Page 4

andyb · 14-Feb-2006, 21:02

That doesnt look too complicated..............ill get back to you.........

Has anyone got one as a sample?

[Edited on 14-2-2006 by andyb]

rockhopper · 14-Feb-2006, 21:04

Maybe Ducati stopped making it because it didn't work and they would be leaving themselves open to claims if they continued to sell it.

I think we did a thread on this last year and we found out then that it had been discontinued!

andyb · 14-Feb-2006, 21:07

If you could fit what amounts to a strip of stainless steel in there, as you can, it has to be better than the chain whacking the alloy or mag housing if it breaks!

rockhopper · 14-Feb-2006, 21:14

True.

BDG · 15-Feb-2006, 01:33

Andy, i'll have one as well if you can do them, are you sure it won't be made out of bent copper and not stainless:P

andyb · 15-Feb-2006, 09:41

Quote:

Originally posted by BDG
Andy, i'll have one as well if you can do them, are you sure it won't be made out of bent copper and not stainless:P

I was going to use northern monkey metal..............:P

BDG · 15-Feb-2006, 10:38

Quote:

Originally posted by andyb

Quote:

Originally posted by BDG
Andy, i'll have one as well if you can do them, are you sure it won't be made out of bent copper and not stainless:P

I was going to use northern monkey metal..............:P

Naw, it'll be too expensive

andyb · 15-Feb-2006, 23:24

Any idea of what these cost from ducati when you could get them?

frazerr · 16-Feb-2006, 00:35

14 quid or so

skidlids · 16-Feb-2006, 01:01

When my mate Adrian gets back from his holiday in France I have a list of jobs for him as well as bits for the Minitwin bike I also have aengine case protector on the list and as I have a left engine case sat on the shelf it shouldn't take him to long to come up with something, afterall he works in a Sheet metal workshop

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

14-Feb-2006, 21:02	#31
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! That doesnt look too complicated..............ill get back to you......... Has anyone got one as a sample? [Edited on 14-2-2006 by andyb] Reply

14-Feb-2006, 21:04	#32
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton Maybe Ducati stopped making it because it didn't work and they would be leaving themselves open to claims if they continued to sell it. I think we did a thread on this last year and we found out then that it had been discontinued! Reply

14-Feb-2006, 21:07	#33
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! If you could fit what amounts to a strip of stainless steel in there, as you can, it has to be better than the chain whacking the alloy or mag housing if it breaks! Reply

14-Feb-2006, 21:14	#34
rockhopper Registered Forum User Ducati Corse Posts: 3,367 Join Date: Jul 2001 Location: Pinxton True. Reply

15-Feb-2006, 01:33	#35
BDG Registered Forum User Ducati Corse Posts: 3,893 Join Date: Sep 2003 Location: The North Mood: Daft as MartinH after too much Smirnoff Ice Andy, i'll have one as well if you can do them, are you sure it won't be made out of bent copper and not stainless:P Reply

15-Feb-2006, 23:24	#38
andyb Registered Forum User BSB Star Posts: 6,720 Join Date: Feb 2002 Location: northampton Mood: Has change happened...must of missed it! Any idea of what these cost from ducati when you could get them? Reply

16-Feb-2006, 00:35	#39
frazerr Registered Forum User Posts: 11 Join Date: May 2004 14 quid or so Reply