Registered Forum User
BSB Star
Posts: 6,720
Join Date: Feb 2002
Location: northampton
Mood: Has change happened...must of missed it!
If all you want is to remove the exhaust, why are you undoing all that other stuff?
What you need is a universal joint on your 10mm socket, and a bit of patience. Attack it lying to the right side of the bike, no worries ive done this today!
Id a studd comes out, then take the captive nut off it once its all off of the bike, then refit the stud after locking two ordinary nuts on to the stud.
Threaded Mode