Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Help with Cycle Cat Bar Riser DBR21 install

[marlboroman]

Thanks for the info guys.

I also sent Cycle Cat a message and got the following reply:
"Alex,
You are correct that the right bar will have 2 holes and the left 1 hole. There should be numbers on the neck of the handle bars. Right should have 058 and left 057. The clip-ons themselves should have a number engraved on the bottom flat the right 036 and left 035. These numbers correlate to the packing list included in your box. Another way to know is that the head of the clip-on which holds the bar will be facing away from the rider...."

Hope this will help anyone else doing this install in the future.

Now I'm having problem adjusting the bar because I'm having clearance problem with my glove on. At the highest setting of the rotational thingy and with 15mm from bottum of triple to top of CycleCat clip on, the knuckles protector on my gloves are hitting the bottum of the rear view mirrors when doing a lock to lock. I don't have equipment to do the milling and cutting that Iang did, but I can see how the bar are long.

Wish there was something in the market that would let me change the mirror/turn signal into just flush mounted turn signal and using CRG mirror instead. Is There? This would solve my clearance issue at highest setting.

What kind of setting are you guys using to avoid the clearing issue? Or is it just me!