hi there standard settings are starting with front pre-load 5 rings showing
10 clicks out from fully closed for rebound top screw
12 clicks out from fully closed (if you are finding fr. a bit hard try another 2 clicks out here )for compression the bottom screws
rear compression screw 1 turn out the top screw and the same for rebound screw 1 turn out both from fully cosed
As for rear pre-load that could be any where ,check to see how much sag you have by fully extending rear shock and letting it full under its own weight (hopefully some one supporting front of the bike)you are after 8-12 mm .
hopefully of some use goodluck paul
Hybrid Mode
