 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Search this Thread | Display Modes |
| |
| #1  08-May-2006, 23:54 | ||||
| ||||
| Bradders I fixed mine and am pretty sure that AK did his with a Ally fairing front bracket. You''ll need to weld a mount point for that on the headstock. A 996 style headlamp bracket might be too heavy - or you'll need a pretty strong weld. The nose is mounted to this barcket. The sides are fixed at the top to jubilee type brackets mounted on the frame rails. The bottom of the sides are fixed to the bellypan which is mounted under the engine. The bellypan is mounted to the underneath of the engine at the back (but not the front). If you're passing Camberley on your travels drop in for a butchers. I had to dremel the back of the right hand fairing to get over the clutch cover - as per the pics.    [Edited on 8-5-2006 by Rattler]  |
Hybrid Mode
