Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 13-May-2006, 03:40
loony888 loony888 is offline
Registered Forum User
Mille
 
Posts: 382
Join Date: Sep 2005
Mood: sensational!!
if you use the old head gasket, assuming it's the same type as the new one you are going to use, that should give an accurate measurement. use some solder or plasticine to measure it with. use base gaskets to alter the squish, often the tolerance is too large so machining the base of the barrel with an appropriate base gasket is the usual way to get to 1.0mm
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 18:55.