Case protector against chain breakage - Page 3

loverobot · 13-May-2006, 14:21

i would really like one as i have been fitting my own chains lol

skidlids · 13-May-2006, 20:45

Just fitted one to the 996, had to tweek it slightly with a pair of pliers but it is now in place and I will be out on the bike tomorrow,
I haven't tried fitting a sprocket cover as i don't run one on the 996,
Also I am running a 14T front sprocket and have loads of clearance so should be OK with a 15T, I will find out when I fit one to the 998 Hybrid in the next day or two.
At some time I will try and fit the sprocket cover as it looks as if it should fit OK once the bit of plastic protruding like a small shelf is cut off from the inside as the stainless protector comes around this far

Jasper · 13-May-2006, 21:18

I'll have one too,please.Was in the process of making some,but as you've already done it!!

chris.p · 13-May-2006, 23:54

As Jasper is not going to make his I will have two of yours please Kev.

Chris.

Chaz · 16-May-2006, 14:12

Quote:

Originally posted by skidlids
just had a text from my mate Adrian to say they have made a prototype in steel that we will try on my bike this weekend, if all is OK we will knock out a batch of stainless ones.
Also getting made at the moment are the rear Bellypan brackets for the 748/916/996/998 models, masde in stainless and are for use with race bellypans.

We will also be looking at making stainless brackets to prevent the sidestands flipping up on SS models, monsters etc.

How much do think the case protectors will be.

ROACHMAN · 16-May-2006, 20:33

Dont forget me Kev (998 model please 15t)

skidlids · 16-May-2006, 21:43

After showing them to a few people at the weekend (Roachman, Nattyboy, Jacko, Karl, Eddie and a few more) and asking them about price, we have settled on £10 each to DSC Members.

Demand looks quite strong and I have asked for another 20 or so to be made, but to hold off making them until I know if any mods will be needed to fit the sprocket cover.

I have taken pics of the one on the 996 and hope to fit one to the 998 before taking it to the BMF and will see if I can get a sprocket cover to fit with it in place.

bradders · 16-May-2006, 21:46

sounds good Kev

skidlids · 17-May-2006, 02:04

Pic of it fitted to my 996

chris.p · 17-May-2006, 07:54

Quote:

Originally posted by skidlids
Pic of it fitted to my 996

Looks good to me kev, 2 please

Chris.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

13-May-2006, 14:21	#21
loverobot Registered Forum User 500SD Posts: 723 Join Date: Aug 2005 Location: leeds i would really like one as i have been fitting my own chains lol Reply

13-May-2006, 21:18	#23
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK I'll have one too,please.Was in the process of making some,but as you've already done it!! Reply

13-May-2006, 23:54	#24
chris.p Registered Forum User Ducati Corse Bikes: Monster 1100 EVO Posts: 3,969 Join Date: Jul 2003 Location: lincoln Mood: I'm A Grandad again :-) As Jasper is not going to make his I will have two of yours please Kev. Chris. Reply

16-May-2006, 20:33	#26
ROACHMAN Registered Forum User Mille Posts: 111 Join Date: Apr 2004 Location: Swindon, Wilts Dont forget me Kev (998 model please 15t) Reply

16-May-2006, 21:46	#28
bradders Registered Forum User MotoGP God Bikes: 848, M620 DD bike Posts: 11,913 Join Date: Aug 2003 Location: Hants Mood: waiting... sounds good Kev Reply

17-May-2006, 02:04	#29
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Pic of it fitted to my 996 Last edited by skidlids : 19-Aug-2008 at 02:46. Reply