MotoGP God
Posts: 18,275
Join Date: Apr 2002
Location: Oxford
Mood: Its ONLY a Bike Club
Just fitted one to the 996, had to tweek it slightly with a pair of pliers but it is now in place and I will be out on the bike tomorrow,
I haven't tried fitting a sprocket cover as i don't run one on the 996,
Also I am running a 14T front sprocket and have loads of clearance so should be OK with a 15T, I will find out when I fit one to the 998 Hybrid in the next day or two.
At some time I will try and fit the sprocket cover as it looks as if it should fit OK once the bit of plastic protruding like a small shelf is cut off from the inside as the stainless protector comes around this far
skidlids
Threaded Mode