Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 14t front sprocket for 916

[DUCMANs]

Originally Posted by CipiVTS

The 748 has 14/38 as standard.

I would go 3 teeth up on the back to really make a difference. Anyway, you will have to fit a 96 link chain

Try this: http://www.xs4all.nl/~ator0437/gc/ to see the difference between going down 1 in front or 2 or 3 up in the back.

Regards, Jean

[CipiVTS]

Thanks for the software. I didn't know there is so much difference even by changing the rear tyre.

I have a 916 with 2:1 primary ratio, 14:36 sprockets and a 180/55/17 rear tyre.

With the 180 profile is overgeared comparing to the 190 profile. I have a standard box that cracked so i will fit a close ratio (748) one.

I'm really curious how it will be?