Front weel spacers 888 Strada

Rob B · 09-Jun-2006, 18:47

I have no spacers. The shoulder on the axle pin is one spacer and that faces to the bearing. The opposite side has the speedo drive as the spacer. Again, no washers except for speedo drive compnents. Make sure the theaded spacer is fully seated and piched up before you start to assemble the rest though.

pibbow · 09-Jun-2006, 19:26

Hi Rob when you say make sure the threaded spacer is fully seated in which direction ie dose it push in from the outside and rest at a stop?

Rob B · 09-Jun-2006, 19:39

no, the inside. Flange next to the speedo drive

pibbow · 09-Jun-2006, 19:50

I've been out to the garage I see what you mean thanks mate there is one more problem (I have not tried to seat that spacer in further yet) any idea why the plastic speedo drive is toutching the allen bolts holding the brake disc to the wheel??

Peter

Rob B · 09-Jun-2006, 20:13

Maybe the wrong speedo drive. Other than that, no idea.

BTW, my bike is fitted with Ohlins and 5 spoke mag marchie's. There may be some differences.....

pibbow · 09-Jun-2006, 20:24

Thank's mate any chance of some pictures of your bike?

Peter

aka.eric · 09-Jun-2006, 20:42

Should look like this-

Rob B · 09-Jun-2006, 20:48

Sure, what sort of shots do you want. I have loads of this winters rebuild and a bunch of different detail shots so it's possible to get at assembled the same way again :-)

ping me your email and requests

Mr. R · 09-Jun-2006, 22:20

Quote:

Originally Posted by pibbow

I've been out to the garage I see what you mean thanks mate there is one more problem (I have not tried to seat that spacer in further yet) any idea why the plastic speedo drive is toutching the allen bolts holding the brake disc to the wheel??

Peter

Hi, yeah wrong bolts holding the discs on? they should have shallow heads to clear the speedo drive,normal allen heads are too deep but bolts sold on ebay are normally wrong! check these out.

Steve

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

09-Jun-2006, 19:26	#2
pibbow Registered Forum User Mille Posts: 378 Join Date: Jun 2005 Location: Scotland Mood: Very sad Hi Rob when you say make sure the threaded spacer is fully seated in which direction ie dose it push in from the outside and rest at a stop? Reply

09-Jun-2006, 19:39	#3
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy no, the inside. Flange next to the speedo drive Last edited by Rob B : 09-Jun-2006 at 19:42. Reply

09-Jun-2006, 19:50	#4
pibbow Registered Forum User Mille Posts: 378 Join Date: Jun 2005 Location: Scotland Mood: Very sad I've been out to the garage I see what you mean thanks mate there is one more problem (I have not tried to seat that spacer in further yet) any idea why the plastic speedo drive is toutching the allen bolts holding the brake disc to the wheel?? Peter Reply

09-Jun-2006, 20:13	#5
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Maybe the wrong speedo drive. Other than that, no idea. BTW, my bike is fitted with Ohlins and 5 spoke mag marchie's. There may be some differences..... Reply

09-Jun-2006, 20:24	#6
pibbow Registered Forum User Mille Posts: 378 Join Date: Jun 2005 Location: Scotland Mood: Very sad Thank's mate any chance of some pictures of your bike? Peter Reply

09-Jun-2006, 20:48	#8
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Sure, what sort of shots do you want. I have loads of this winters rebuild and a bunch of different detail shots so it's possible to get at assembled the same way again :-) ping me your email and requests Reply