Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Slipper Clutch Spider Spring

[Felix]

On the 6 post clutches the free height of the spring should be 7.5 mm or greater. On the 999RS 4 post clutches, they increased this a 8 mm minimum.

PM me an email address, JPM, and I'll send you the pdf for the clutch assembly if you want (~800k).

[Gizmo]

I'll strip it later this week and measure, new spring ordered anyway and a new dished plate. Like Jon says I'm fairly sure it was assembled correctly, we took it apart enough times to work out where everything went stack height was correct and it worked perfectly for 2 weeks then started slipping

[keefer]

mine is on its 3rd season now.
no problems at all