Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 748 exhaust suggestions

[Duke2BSteve]

Mines on 50mm, haven't had any bother with it, just need to change my gearing to squeeze some more power!!!

[Gav748sp]

JJ

I had a full 50mm system on my bike , now have a full 54mm system, must admit i prefer the 54 but i have done a few things to the bike....!

Saying that the 50mm system was also good, the SP made 105 RWHP on the dyno with that system, a pc3 and a couple of other bits.

So i`d say, as others have, depends on how much you have done/going to do to the bike, both good.

My system may also be for sale soon if you are interested.

Cheers

Gav

[jj250]

Gav, what other mods have you made?

[keefer]

my 748SP made 100HP with 50's
they came as standard on the SP's but they also came with hot cams and stronger conrods.
I would not think it would be worth going larger than 50mm on a 748.
and they will be more available.
I sold mine for around 500 when I went to a 54 on the 996
all depends how much you want to spend.
but if money is no object then get a bigger engine and start on that

[Gav748sp]

JJ

That could take a while to list.....
Really quite a few now.... lets just say the only original parts of the SP left, are the two crankcase halves and some internals in the bottom half!

If you want to get in touch u2u me and i will give you my number.

Gav

[Stinkwheel]

I've got 50mm carbon Termis with a JHP chip on my '99 748 Bip. Fantastic combination, no problems - highly recommended!

(buy some earplugs!)

Stinkwheel