Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Open clutch covers - warranty question

[LeeeeeeL]

Thanks Iang will contact them later today

Have seen the post on fitting just hope it is as easy as it sounds, thanks for all advice etc.....

[iang]

Leeeeeel, It will take you no more than 20 minutes, just make sure that you do not cross the threads on the clutch posts, its easy done and do not use thread lock on the bolts or you will round the heads off when you try to get them out, the spring tension will keep them in.

When you fit the gia moto clutch cover the logo or centre strip points towards the curve in the fairing and does not go straight as you would think, you will see what I mean when you fit it. You will also have to take the rubber gasket off or the cover will hit the fairing.

[LeeeeeeL]

Love this site top tips all round. Did you torque the clutch post spring bolts or just tighten them ?

[ath748]

Originally Posted by LeeeeeeL

Love this site top tips all round. Did you torque the clutch post spring bolts or just tighten them ?

I didn't use a torque wrench on mine. Did them up hand tight (which is fairly tight), tightened them up after a week or two, now I keep an eye on them when I clean the bike. Just to be safe.