VeeDub Transporters?

nathanhu · 01-Aug-2006, 00:09

lowering should be easy as the only springs to replace are fitted to the rear, the fronts are torsion bars and just need re-setting, i never did mine as i fitted it out as a camper and i needed the ride hight

nathanhu · 01-Aug-2006, 09:44

if your after windows ....funnly enough ive got some in the celler!!!
2x rear side windows (double glassed) and one side window

Bones · 01-Aug-2006, 11:30

Hi ~Nick
Wot happened to the Espace is it dead then.............? . Or just trying to be cooler in ya old aga

NBs996 · 01-Aug-2006, 19:44

Quote:

Originally Posted by Bones

Hi ~Nick
Wot happened to the Espace is it dead then.............? . Or just trying to be cooler in ya old aga

Bonio, the espace is fine. Just decided I don't want a wife, kids and labrador after all! Just gotta straighten the bonnet hinge and it'll be going on ebay.#
Can't get 2 bikes in an espace anyway, and let's get real... you can't muster up any decent road rage in an espace!

domski · 01-Aug-2006, 19:46

Quote:

Originally Posted by NBs996

Just decided I don't want a wife, kids and labrador after all!

I hope you told them!!

EMPI · 03-Aug-2006, 22:49

I got one

Been tuned for at least 30hp. Got plans for lowering and big alloys

Posibally not what everyone else is talking about, but proves they last forever... if you are a good welder...

Monty · 03-Aug-2006, 22:58

Funnily enough I saw a split screen on a trailer going north up the M! last friday-it was a hightop-never seen a split hightop before, and it was immaculate, probably going to a show. I have had 6 beetles but never a camper or van-fitted a Porsche Super 90 engine in one of my beetles, tuned 1600 in another, 4 barrel Holley carb, lowered, 6in rims on front 8.5in on the rear, Koni adjustable shocks the lot-fast old thing that was-for it's day.

John

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

01-Aug-2006, 00:09	#1
nathanhu Registered Forum User 500SD Posts: 631 Join Date: Aug 2003 Location: Germany, 3 hours from the ring.. Mood: head down lowering should be easy as the only springs to replace are fitted to the rear, the fronts are torsion bars and just need re-setting, i never did mine as i fitted it out as a camper and i needed the ride hight Reply

01-Aug-2006, 09:44	#2
nathanhu Registered Forum User 500SD Posts: 631 Join Date: Aug 2003 Location: Germany, 3 hours from the ring.. Mood: head down if your after windows ....funnly enough ive got some in the celler!!! 2x rear side windows (double glassed) and one side window Reply

01-Aug-2006, 11:30	#3
Bones Registered Forum User Mille Posts: 237 Join Date: Jan 2006 Location: Christmas Pie,Surrey Mood: THUNDERPANTS HERE I COME, NEW PANTS PLEASE :-0 Hi ~Nick Wot happened to the Espace is it dead then.............? . Or just trying to be cooler in ya old aga Reply

03-Aug-2006, 22:49	#6
EMPI Registered Forum User Bevel Head Posts: 82 Join Date: Sep 2005 Location: Fife, Scotland Mood: Aroused I got one Been tuned for at least 30hp. Got plans for lowering and big alloys Posibally not what everyone else is talking about, but proves they last forever... if you are a good welder... Reply