Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 851 / 888 > advice needed

[Nattyboy]

Hi Dave

Ive took route 1 (as in Robs e-mail). It is possible with some jiggerypokery and QB Carbon do a good seat mould. Here is my finished article. Have attached a few shots of the job in progress !

Some notes

Be sure to fit some heat shrink plastic or foam to the subframe pins that the srada side panels fit on to or they will pierce a nice hole in your freshly painted seat unit (as I found out to my cost !!)

The QB mould has 'desmoquattro' moulded in to it so you will need to sand that out (probably from a moulding of an SP4 seat which had a sticker there)

Ive probably got some OE from and rear seat pads coming over in the next few weeks from italy - give us a shout then !

The long dzus fastener that secures the bum pad is still available from dealers - about £8.

Cut your self a big hole in the seat unit behind the bum pad (see attached pic) so you can still use the underseat storage !

Cheers
Nat

[Nattyboy]

The hole to access the storage

[Nattyboy]

Finished !

[888 dave]

cheers guys now i know it is possible just didnt want 2 cut the strada sub frame.

[bitchinSP4]

Hello Dave.

Yes I know Gianluca fairly well, he's a friends buisness partner. Might be worth a trip over there if only to see his museum, he has a couple of 851-888 race bikes and the mighty V6 Laverda!!

Happy Hunting.

Mike.

[aka.eric]

Seat unit on mine came from Ricambi Weiss.Excellent value for money.Requires a small amount of fitting,but no cutting of the subframe.Im using the Strada seat pad,so your weight is on the frame.

[888 dave]

time too make up my mind now got a call from a guy sellin a sp4 and im goin 2 see weeveetwins 888 strada on tuesday he has a mint bike that is original might be a shame too start modin steves bike.

[888 dave]

Originally Posted by bitchinSP4

Hello Dave.

Yes I know Gianluca fairly well, he's a friends buisness partner. Might be worth a trip over there if only to see his museum, he has a couple of 851-888 race bikes and the mighty V6 Laverda!!

Happy Hunting.

Mike.

rang gianluca today he was out spoke 2 davide he was v helpfull will speak 2gianluca mon thanks again dave.

[888 dave]

thanks 4 all the advice mike rob loony nat eric,would love a sp5 but italy is along way,late model strada with a single seat would look similar.is the performance differance between strada sp4/5 alot cheers dave.