| Thanks John!
Best I can do is a couple of shots from the RS parts cat. The "special bolt" is part number 13 (pic 1). It bolts onto the engine via the triangular water-way cover on the side of the horizontal cylinder. It is M6 threaded down the centre of it to accept the bolt (part no 38 in pic 2) that goes through the lower mount on the RS carbon battery box. It sits kinda directly behind the rec/reg.
Anyway, hopefully the attached pics will make everything clear!
Dimensions would be most helpful but if you think it's something you could replicate then that would be bleedin' marvelous!!!
Many thanks, Neil.
Last edited by neil748r : 11-Sep-2006 at 00:03. | 
Threaded Mode