Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 851 / 888 > Corsa parts needed

[Motobee]

Greeting all,

I am restoring one of Carl Fogarty's 1993 Factory Works 888/926 Ducati
World Superbikes, and have looked everywhere for these parts, but
cannot find them.

Carbon fiber front fender #56410161AA
Carbon fiber left fairing #48010241BA
Termignoni carbon fiber mullfer, left side #57410421A
Rear seat pad #59510111B
Verlicchi Racing Frames sticker (Black font with yellow background)

1993 Factory Works Brembo narrow-band steel front brake rotors with
large offset (19mm) to fit a 3-spoke Marchesini wheel, or Brembo
carbon-carbon front brake rotors with large offset (19mm) to fit
3-spoke front Marchesini wheel.

Here is a photo of the steel rotors that I am looking for:
http://www.mad-ducati.com/images/Mosport2003/Mark%20T's%20888%20Corsa.jpg

Please let me know if you know the whereabouts of any of these parts.

Thanks!
Sincerely,
Brian Brown

[phil911]

Brian

I'm convinced these steel rotors (from your pic) have never fit Marchesini 3 spoke mag wheels. These are an adaptation, even if they look like 1994 Brembo rotors from original Corsa, but the offest is quite different :



Original 1993 rotors with Marchesini 3 spoke are the followings :



Phil911

[Duke2BSteve]

if you're after 888 parts, then Nattyboys independent traders is the place. He's Mr 888 !!!!

[Motobee]

Sorry Phil, but the rotors are not an adaption. They were fitted to all of the Factory Ducati team bikes in 1993. That is why they are so rare. Look at any photos of the factory bikes from 1993 and they will either have carbon/carbon rotors (if it is a dry race) or these narrow-band rotors with a large offset (if it is raining).

The 3 spoke rotors that are in your photo are the standard Corsa rotors that were fitted to the Customer bikes but not the Factory team bikes.

Anyway, if you ever see a set, let me know

Brian

[Nattyboy]

U2U Brian..