oil pressure switch

TopiToo · 20-Oct-2006, 21:48

Hello

Can anybody help.

A. is off my bike, will B fit?

TopiToo

Chaz · 20-Oct-2006, 21:55

no it won't

TopiToo · 20-Oct-2006, 22:09

Hello chass

thanks, as I thought, found the new one in the garage
was hoping I could use it.

TopiToo

skidlids · 20-Oct-2006, 22:29

I would have said yes as I removed the later type from my 620 engine after it leaked at the Cadwell trackday and fitted the earlier one with the spade connector.
I modified the harness bypearing off soe of the insulation on the original connecting wire and Ting in a piec of wire fitted with a 1/4" spade terminal.
It worked fie at the final DD round

Chaz · 20-Oct-2006, 22:35

Ones a taper thred i't not the right sensor IMO.

Zimbo16 · 20-Oct-2006, 23:12

I believe the pressure switch off a Vauxhall Aguila (sp?) 1.1 is pretty much identical and a straight swap, costs a couple of pounds from your local car parts place.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

20-Oct-2006, 21:48	#1
TopiToo Registered Forum User Ducati Meccanica Bikes: 748ish . . Posts: 2,121 Join Date: Sep 2001 Location: SW Londinium Mood: Sampai jumpa lagi oil pressure switch Hello Can anybody help. A. is off my bike, will B fit? TopiToo Reply

20-Oct-2006, 21:55	#2
Chaz Registered Forum User Ducati Corse Bikes: 916 Strada Posts: 3,844 Join Date: Jul 2003 Location: At some track or another:) Mood: www.od2racing.co.uk no it won't Reply

20-Oct-2006, 22:09	#3
TopiToo Registered Forum User Ducati Meccanica Bikes: 748ish . . Posts: 2,121 Join Date: Sep 2001 Location: SW Londinium Mood: Sampai jumpa lagi Hello chass thanks, as I thought, found the new one in the garage was hoping I could use it. TopiToo Reply

20-Oct-2006, 22:35	#5
Chaz Registered Forum User Ducati Corse Bikes: 916 Strada Posts: 3,844 Join Date: Jul 2003 Location: At some track or another:) Mood: www.od2racing.co.uk Ones a taper thred i't not the right sensor IMO. Reply

20-Oct-2006, 23:12	#6
Zimbo16 Registered Forum User Big Twin Posts: 1,057 Join Date: Jan 2006 Location: Gloucestershire Mood: Feeling peckish I believe the pressure switch off a Vauxhall Aguila (sp?) 1.1 is pretty much identical and a straight swap, costs a couple of pounds from your local car parts place. Reply