Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Led's

[DEMON]

Originally Posted by 749er

they will need to be 12V to be compatible with you battery, but apart from that it would be good to get close to the same kind of luminance (brightness) as the stock part. Too bright can be distracting for drivers behind, hence you are not supposed to drive with a rear fog light on in normal conditions. Also if not bright enough then more difficult to see.

As Nat says, use a red led, but I would not personally use a clear lens unless it did a good job of "diffusing" the light source

No they dont need to be 12v ! you just need the correct current limiting resistor fitted in the right place.

[749er]

Originally Posted by DEMON

No they dont need to be 12v ! you just need the correct current limiting resistor fitted in the right place.

well I guess thats true, but I was referring to battery compatibility, saves adding the extra bits

[Albie]

Im gonna go for the £30 ones on ebay unless I find a better source. I hope to mount the indicators in the top breather vents behind silver mesh.

[DEMON]

I have the 30 quid ebay ones and they are good, i can vouch for them...nice pattern when lit up.

lets have the link to ones you've seen to see if they are the same then !

[Melnie Mouse]

Originally Posted by DEMON

I have the 30 quid ebay ones and they are good, i can vouch for them...nice pattern when lit up.

lets have the link to ones you've seen to see if they are the same then !

what you nicked them off albie? ah poor albie, you didn't give him a chance!

[Albie]

http://cgi.ebay.co.uk/Ducati-748-916...QQcmdZViewItem
No mel the leds ok
I got bumped in the trashed 748 seat. Hey mel can you checkout if cmws have any bits.

This is the light unit details.