Spaghetti exhaust

Douglas851 · 28-Oct-2006, 17:35

45mm is perfectly good up to about 115hp.

For 120hp+ you need the 50mm

888heaven · 28-Oct-2006, 20:54

unless i was mistaken i thought it said it was a 45 system.
does anyone know if this system releases anymore power
cheers ian

Douglas851 · 29-Oct-2006, 00:35

It releases more power at the top end, allows it to rev further and sounds much better. You will also need an FIM or similar chip.

NUx · 29-Oct-2006, 08:49

I thought the 45 mm is the best thing for a 851/888.
On ebay germany there is a 50mm collector, but that is for a 926!
You can put it on your 851/888, but you won't get that much advantages.

Mr.R · 29-Oct-2006, 09:23

Hi, the size as in 45/50mm is more to do with the lift,timeing and size of the exhaust valves, than the capacity of the motor. The 926 would be running bigger valves and latter full race cams, i think.
Steve Robins s.w.

weeveetwin · 29-Oct-2006, 14:01

Not a full system, but some 888 Termis here:

http://cgi.ebay.com/ws/eBayISAPI.dll...m=120046699672

Rob B · 29-Oct-2006, 14:43

Road legal 80db jobbies.

888heaven · 30-Oct-2006, 20:25

Well ive taken a gamble and bought the old T8 a new exhaust system whether it will work well with the strada engine road time will tell.
it will make winter more interesting as it needs polishing and fitting and a dyno run will give me a true wheel BHP figure something the old girl has never had.

gary-g · 30-Oct-2006, 21:46

a dyno run will give me a true wheel BHP figure something the old girl has never had.[/quote]

Are you getting Alf to do that?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

28-Oct-2006, 17:35	#1
Douglas851 Registered Forum User Mille Posts: 145 Join Date: Feb 2005 Location: Hastings, East Sussex 45mm is perfectly good up to about 115hp. For 120hp+ you need the 50mm Reply

28-Oct-2006, 20:54	#2
888heaven Registered Forum User 500SD Posts: 522 Join Date: Aug 2003 Location: Worthing Sussex Mood: UKGS'ers Non PC and Vibrant unless i was mistaken i thought it said it was a 45 system. does anyone know if this system releases anymore power cheers ian Reply

29-Oct-2006, 00:35	#3
Douglas851 Registered Forum User Mille Posts: 145 Join Date: Feb 2005 Location: Hastings, East Sussex It releases more power at the top end, allows it to rev further and sounds much better. You will also need an FIM or similar chip. Reply

29-Oct-2006, 08:49	#4
NUx Registered Forum User Mille Posts: 142 Join Date: Oct 2005 I thought the 45 mm is the best thing for a 851/888. On ebay germany there is a 50mm collector, but that is for a 926! You can put it on your 851/888, but you won't get that much advantages. Reply

29-Oct-2006, 09:23	#5
Mr.R Registered Forum User GTL Posts: 474 Join Date: Aug 2006 Hi, the size as in 45/50mm is more to do with the lift,timeing and size of the exhaust valves, than the capacity of the motor. The 926 would be running bigger valves and latter full race cams, i think. Steve Robins s.w. Last edited by Mr.R : 29-Oct-2006 at 09:26. Reply

29-Oct-2006, 14:01	#6
weeveetwin Registered Forum User 500SD Posts: 779 Join Date: Apr 2004 Location: Wearside 888 Termis Not a full system, but some 888 Termis here: http://cgi.ebay.com/ws/eBayISAPI.dll...m=120046699672 Reply

29-Oct-2006, 14:43	#7
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy Road legal 80db jobbies. Reply

30-Oct-2006, 21:46	#9
gary-g Registered Forum User Mille Bikes: Sts4s in red, of course! Posts: 183 Join Date: Dec 2004 Location: Shoreham-by-Sea, Sussex Mood: Ah....Switzerland! a dyno run will give me a true wheel BHP figure something the old girl has never had.[/quote] Are you getting Alf to do that? Reply