Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > General Motorcycles only > Cleaning exhausts

[jeff st4s]

Originally Posted by djb

Thinking Lithium Ion 8000 with polishing kit / brushes etc - right choice?

I cannot give advice on what dremmel to buy, send a link maybe.
I use Nouvag stuff, it's Dental equipment and OTT for you and at £2k is a bit steep as well for 1 job.
Those silicon impregnated burrs will not grind through stuff, you have to be fairly determined to do that with them.
Scotchbrite wheels are fine, thats what you can use to get that grained finish on say a Rolex bracelet.
I'll put up some other links for you, some of them are bigger and designed more for static polishing machines, but could be modified to say be used in a drill.

http://www.cousinsuk.com/default.asp...oductid=458739

http://www.cousinsuk.com/default.asp...oductid=456251

http://www.cousinsuk.com/default.asp...oductid=456215

http://www.cousinsuk.com/default.asp...oductid=456163

http://www.cousinsuk.com/default.asp...oductid=456157

http://www.cousinsuk.com/default.asp...oductid=456144

http://www.cousinsuk.com/default.asp...oductid=456129

http://www.cousinsuk.com/default.asp...oductid=456087

Any of the above could be used, that is only touching the surface as it were, they will do different sizes, grades etc but will give you a brief insight to what may be out there for the job.

[djb]

Thanks Jeff

Have the bremel and does the job just dandy....just have to resist the temptation for a mirror finish now.

D