Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > which radial cluch for superbike

[bradders]

ah, ok thanks. Where would I get one of those and are they a standard fitment?

[TP]

If you want one that gives you a lighter action see Nelly/JHP.

[Bungi]

Originally Posted by bradders

so which would you go for mate - 16x18 a good compromise on the clutch?

you could opt for a 19x20 which if you have a std slave cyl wil give you a lighter clutch

[bradders]

Originally Posted by Bungi

you could opt for a 19x20 which if you have a std slave cyl wil give you a lighter clutch

ok, that might be the way then coz the italian geezer sells em at the same price

[Shazaam!]

Originally Posted by Bungi

you could opt for a 19x20 which if you have a std slave cyl wil give you a lighter clutch

You've got it reversed: the smaller the clutch master cylinder diameter -the lighter the pull; the larger the slave cylinder diameter - the lighter the pull. So, the (early) 13mm stock master has a lighter pull than the 16mm Brembo radial which has a lighter pull than the 19mm diameter of the 19x20.