Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > Hydraulic male / male adaptor for oil cooler fitting

[Tonio600]

Attached are a few pix showing the cooler pipes, the crankcase and the adaptor which was originally fitted in the crankcase (one end M14, other end classic banjo bolt I guess). So basically I think I need 2 male/male (M14/M14) adaptors...

Originally Posted by chass

Tonio don't forget you need to put a bymetal part under the oil filter as well, if you you need all the parts I have them & can send the let me know.

Hi CHass,

I think I already have one as the bike was fitted with the carb heating kit. Is that bit a black flat part, with the shape of a question mark?

Cheers
Tonio.

[Chaz]

Originally Posted by Tonio600

Attached are a few pix showing the cooler pipes, the crankcase and the adaptor which was originally fitted in the crankcase (one end M14, other end classic banjo bolt I guess). So basically I think I need 2 male/male (M14/M14) adaptors...



Hi CHass,

I think I already have one as the bike was fitted with the carb heating kit. Is that bit a black flat part, with the shape of a question mark?

Cheers
Tonio.

That's the part you seam ok then.

If you need the adaptors let me know.

[Tonio600]

bump
Doctor AK would you be ok selling me your spare pair?

[paynep]

Hey, not all of us have time to spend our lives on here.

I was just about to ask your address to pop them in the post tomorrow, but if you're sorted I won't bother....?

[Tonio600]

Originally Posted by paynep

Hey, not all of us have time to spend our lives on here.

Paul,reading your messages is always a pleasure

I was just about to ask your address to pop them in the post tomorrow, but if you're sorted I won't bother....?

Yup, I'm sorted thanks to you You've got U2U