Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
Prev   Next
  #3  
Old 21-Jan-2004, 15:58
TopiToo TopiToo is offline
Registered Forum User
Ducati Meccanica
Bikes: 748ish . .
 
Posts: 2,121
Join Date: Sep 2001
Mood: Sampai jumpa lagi
Hello red748,

First off welcome . . I also have a 748Bip and in the past have had to replace the chip with the standard one. From my point of view you notice straight away as the bike kept coughing and spluttering when I opened it up. With a few back fires to wake you up. Don't quote me on this but I would say the bike would not run as smooth if the standard pipe chip was running with termi's on. Barring that the chip is installed in the ECU under the seat, normally with a sticker over the round hole, see if the sticker has been removed at some stage,

Hope this was of some help.

Good luck

TopiToo
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 19:41.