 17-Apr-2004, 19:29 | #9 |
| Registered Forum User Ducati Corse Bikes: 1098  Posts: 3,060 Join Date: Dec 2003 Location: West Midlands Mood: Chilled Dj get a lenght of pipe that will fit real tight on the bleed nipple !you will need the pipe at least 2 ft long then open nipple and hold pipe up above the height of the master cylinder ! then fill the pipe 3/4 full of brake fluid and then gently blow the fluid through the pipe ( empty master cylinder first) make sure as you blow fluid up through the system (A) the pipe does not run out of fluid ! if it looks like its gonna ,hold thumb over end of pipe and tighten bleed nipple up !! basically you are back feeding the system in reverse and pussing the air up to the master cylinder !! its hard to explain how to do it !!!! but it will work ... mav  | |
Threaded Mode