Registered Forum User
BSB Star
Posts: 6,720
Join Date: Feb 2002
Location: northampton
Mood: Has change happened...must of missed it!
Mate. Use the syringe to pull not push!!
Fill the master cylinder with fluid. Attatch a bleed pipe to the slave bleed nipple, and push the syringe into the other end of the pipe. Now open the nipple and draw the syringe back. This will pull fluid and the bubbles, ie anything that is in the system through the nipple. As you get to the end of the stroke of the syringe, close the nipple off.
Take off the syringe and empty it, reconnect and repeat until you get clear fluid through, not forgettting to top up the master cylinder.
Threaded Mode