 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Search this Thread | Display Modes |
| |
 13-May-2004, 14:04 | #1 |
| Registered Forum User 888 at Last !!!  Posts: 957 Join Date: Jan 2002 Location: Horsham, West Sussex The reason that Ducati did the side stand like that - so I'm told - is so that the bike is upright when idling so that the oil travels around the engine correctly when warming up. The noises you can hear from the clutch on idle are completely normal. And the clutch in with less noise is correct. Even my car does that  Did the 998S bayliss rep come with a set of termis & chip as an extra when purchasing or is that just the R's. Anyway, you'd need 50mm end cans only as you've already got 50mm downpipes - and a chip to match. About 750 notes new or ~400-500 secondhand. Tell us about your Benelli experience, would be interesting to know about. [Edited on 13-5-2004 by ziggi] | |
Hybrid Mode
