Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Supersports: SS / SuperSport / Supersport 950 > SSie Supersport Wheels - Where to start....

[twpd]

Well there must be some variability in them then cos I have two! And they fit. As do ST4 wheels. I guess Ducati had been playing with spare parts bin!

[webteam]

Our latest advertisers seem to have some 5 spoke MArchi's

http://www.v-duo.co.uk/parts.html

F

[phillc]

Originally Posted by webteam

Our latest advertisers seem to have some 5 spoke MArchi's

http://www.v-duo.co.uk/parts.html

F

Thanks Frank. I have contacted them about these wheels.

[kenoir]

It seems I'm having a similar problem. I've gor a 900ss ally swing arm (in the 600ss frame) but the rear wheel is a later addition with a 25mm bearing (my spindle it 17mm).

Does anyone know if it's possible to just replace the wheel bearings from 25 down to 17?

Cheers

[Ghost]

Yes you can the bearings are approx 2mm wider which isn't a prob you just have to adjust the external spacer's slightly. Its what I have done with mine.

[skidlids]

As Phil says the answer is yes
replace the existing original fitment bearings which are

75162.2566 = 6005 2RS C3 47 X 25 X 12

with 6303 2RS C3 bearings which have the dimensions 47 X 17 X 14

http://cgi.ebay.co.uk/SKF-Rubber-Sea...item334a14c3ea

As Phil pointed out they are 2mm wider but have the same Outside Diameter and will fit the 17mm spindle

[phillc]

Originally Posted by twpd

Well there must be some variability in them then cos I have two! And they fit. As do ST4 wheels. I guess Ducati had been playing with spare parts bin!

Yep, sounds like it! Could be a bit pot luck then.

Thanks for all the tips and help gentlemen.