sprocket nut

TopiToo · 21-Mar-2009, 18:33

Hello

I need some help, in my stupid wisdom I forgot to loosen
the sprocket nut, any ideas of a way to undo it?

pic attached

TopiToo

Col996s · 21-Mar-2009, 19:41

You need a 12v impact driver. This will spin up and shock it enough to loosen it. Bought mine cheap from Aldi's great piece of kit.

Jasper · 21-Mar-2009, 21:08

Just take your socket with you to any tyre place and they can whizz it off.

21-Mar-2009, 23:54

If you've got a rear wheel your not too worried about, stick that on the other side, clamp it in a workmate and then take the nut off, worked for mine

Cheers,

Shandy

TopiToo · 22-Mar-2009, 20:03

Hello

all done thankyou,

air gun did the trick

TopiToo

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

21-Mar-2009, 19:41	#2
Col996s Registered Forum User Ducati Meccanica Bikes: 996S Posts: 2,320 Join Date: Feb 2004 Location: chelmsford Mood: Waiting for the warmer weather. You need a 12v impact driver. This will spin up and shock it enough to loosen it. Bought mine cheap from Aldi's great piece of kit. Reply

21-Mar-2009, 21:08	#3
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Just take your socket with you to any tyre place and they can whizz it off. Reply

21-Mar-2009, 23:54	#4
Shandy Posts: n/a If you've got a rear wheel your not too worried about, stick that on the other side, clamp it in a workmate and then take the nut off, worked for mine Cheers, Shandy Reply

22-Mar-2009, 20:03	#5
TopiToo Registered Forum User Ducati Meccanica Bikes: 748ish . . Posts: 2,121 Join Date: Sep 2001 Location: SW Londinium Mood: Sampai jumpa lagi Hello all done thankyou, air gun did the trick TopiToo Reply