Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Sport Touring: ST4 / ST3 / ST2 > Will exhausts from an ST3 fit an ST4 ?

[Jools]

I've got Rushjob's old Ducati Performance pipes on my ST2. They were originally on his ST2, then he sold them to Marko, who fitted them to his ST4 with the help of a little judicious stainless steel welding to increase the pipe OD for the ST4, then Marko sold them to me and they were re-welded back down a pipe size to fit my ST2 again. If the pipes are enough of a good deal to add the cost of a tame welder on top anything is possible.

[YMFB]

I am going to get them and see how I get on, it maybe a winter project.

[singletrack]

You can't go wrong with such a bargain!

[YMFB]

Right, the ST3 exhausts dont quite fit, the bracket and length look the same but the end connection is slightly diffrent in diameter. I am thinking if I can find the "crucifix" from an ST4 I could modify it thus saving the DP ST3 exhausts.

Does anyone have one they wish to sell or know the part no.

[John W]

There are 2 sets on ebay (international sellers) right now for an st4 if that helps.

[YMFB]

cheers John, I looked before I made this post, but on re-checking ive found them